2014 Class Rules

Go down

2014 Class Rules

Post  Jupman on Fri 21 Feb - 12:59

Chasis :

Any 1:10 scale 4wd touring car chassis allowed. These chassis has to be run as intended by manufacturer. No drilling or cutting of chassis allowed.No homemade chassis or chassis parts. All Upgrades allowed as intended by manufacturer.

Minimum Width        175mm
Maximum Width        200mm                                              
Wheel Base               270mm                                    
Minimum Height        175mm


1/10 scale touring car bodies only, no custom made wings, no covered wheel arches.


Only foam bumpers allowed. These are to be mounted at the front and rear of chassis as intended. No external (on outside if body) allowed. No wood, metal or other materials for bumpers will be allowed.

1/10 scale touring car wheels only.


Moulded rubber tyres only. No foams. Maximum width is 26mm.


Unopened 540-size silver/grey can Johnson/Mabuchi '2-slot' motors only.NO other brands allowed

21.5 brushless motor and any brushless esc but esc must be on “blinky” mode.
Note : - 21.5 Gearing is limited to under 54mm rollout.


7.2volt NiCad or NiMh, Lipo 7.4volt commercial packs. No Home built packs allowed.

Minimum Weight:


Racing in : Stock TT; Club Stock; Mini 2wd; GT; FWD; 1/12th Pan

Own : TT01E; M03L; TA05v2 IFS; FF03; TA05V2; Schumacher Supastox Pan; Tamiya Nitrage 5.2cc

TRCCC Forum Moderator

Posts : 110
Join date : 2013-07-03
Age : 41
Location : Capri, Cape Town

View user profile

Back to top Go down

Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum